Instant Structural Adhesive

78 kr 63 kr Save 19% Sold out 98 kr 79 kr Save 19% Sold out
Tax calculated at checkout.
04-097-023
Goes well with
Liquid error (snippets/product-recommendations line 11): comparison of String with 2 failed
Instant Structural Adhesive

MOJE AUTO 406 INSTANT CONSTRUCTION ADHESIVE

MA406 Professional is an instant, low-viscosity cyanoacrylate construction adhesive for bonding many plastics and rubber. Glues in just a few seconds. It is especially recommended for difficult-to-glue joints. Operating temperature from -50 to 100ºC. Fully hardened after 24 hours.

Setting times of various materials [seconds]: Neoprene rubber [3], nitrile rubber [2], EPDM rubber [3], balsa wood [2], polycarbonate (PC) plastic [6], ABS plastic [20], metal steel [20].

HOW TO USE
  1. Clean and degrease the repaired surfaces from any remaining oil, dirt and grease, and then dry them.
  2. Apply a small amount of glue to one of the glued surfaces.
  3. Immediately apply the second element and press firmly for a few seconds to obtain initial strength.
  4. The adhesive gains full strength after 24 hours.
  5. Remove excess glue immediately using a cloth soaked in acetone.

Goes well with
Liquid error (snippets/product-recommendations line 11): comparison of String with 2 failed
Instant Structural Adhesive
SPECIFICATIONS
  • Art. No. KTM 20-A45
  • Capacity: 10g
  • Connects instantly in 2-6 seconds

Setting times of various materials [seconds]:

  • Neoprene rubber [3]
  • Nitrile rubber [2]
  • EPDM rubber [3]
  • Balsa wood [2]
  • Polycarbonate (PC) plastic [6]
  • ABS plastic [20]
  • Metal steel [20].
Goes well with
Liquid error (snippets/product-recommendations line 11): comparison of String with 2 failed
Instant Structural Adhesive
Goes well with
Liquid error (snippets/product-recommendations line 11): comparison of String with 2 failed
Instant Structural Adhesive