Instant Structural Adhesive

MOJE AUTO 406 INSTANT CONSTRUCTION ADHESIVE

MA406 Professional is an instant, low-viscosity cyanoacrylate construction adhesive for bonding many plastics and rubber. Glues in just a few seconds. It is especially recommended for difficult-to-glue joints. Operating temperature from -50 to 100ºC. Fully hardened after 24 hours.

Setting times of various materials [seconds]: Neoprene rubber [3], nitrile rubber [2], EPDM rubber [3], balsa wood [2], polycarbonate (PC) plastic [6], ABS plastic [20], metal steel [20].

HOW TO USE

1. Clean and degrease the repaired surfaces from any remaining oil, dirt and grease, and then dry them.
2. Apply a small amount of glue to one of the glued surfaces.
3. Immediately apply the second element and press firmly for a few seconds to obtain initial strength.
4. The adhesive gains full strength after 24 hours.
5. Remove excess glue immediately using a cloth soaked in acetone.

SPECIFICATIONS

• Art. No. KTM 20-A45
• Capacity: 10g
• Connects instantly in 2-6 seconds

Setting times of various materials [seconds]:

• Neoprene rubber [3]
• Nitrile rubber [2]
• EPDM rubber [3]
• Balsa wood [2]
• Polycarbonate (PC) plastic [6]
• ABS plastic [20]
• Metal steel [20].